Construction
Tube body, two screw-on end caps, two removable collet pieces
Buachois · General pin vise
Buachois Double-Ended Screw-Collet Pin Vise
One handheld body with two screw-closing ends and two removable collet pieces.
Confirm the actual receiving range for the intended shank.
$8.79Nov 6, 26, 08:50 PM · New York
Add to cart Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Opens the product on Amazon. Check the selected offer, contents and current price there.
- Construction Tube body, two screw-on end caps, two removable collet pieces
- Overall length Approximately 9.2 cm / 3.6 in
- Grip Fluted/textured body
The physical equipment
Construction & package details
Supplied
One holder body and two heads/collet pieces
What this choice changes
Choose screw-closing ends instead of a sliding chuck
This Buachois holder uses screw-on caps at both ends to secure removable collet pieces. That is the practical construction difference from the Horotec slide-lock chuck. The fluted body gives a textured area to hold, while the two-end layout is a different choice from a model-drilling handle with a rotating grip end.
The seller lists one holder body and two removable heads or collet pieces. Those are components of one holder, not extra complete vises or an included drill-bit set. The nominal overall length is approximately 9.2 cm / 3.6 in. The source explicitly says old and new types are shipped randomly, so the particular cap geometry shown is not selectable.
Before choosing it for a particular shank, confirm the actual collet fit. The title gives 0–3 mm, while the detailed description lists approximately 0.5–0.8 and 1.4–2.0 mm without assigning those ranges to the ends or constructions. A continuous 0–3 mm receiving range is therefore not established. If the exact material matters to your task, confirm it too: the listing uses brass and copper wording without a consistent component-to-alloy specification.
Specifications & supplied details
| Detail | Listed specification |
|---|---|
| Construction | Tube body, two screw-on end caps, two removable collet pieces |
| Overall length | Approximately 9.2 cm / 3.6 in |
| Grip | Fluted/textured body |
| Supplied | One holder body and two heads/collet pieces |
| Delivered configuration | Old/new types sent randomly, as explicitly stated |
| Stated clamping ranges | Title 0–3 mm; description 0.5–0.8 and 1.4–2.0 mm, without an end map |
| Material wording | Brass/copper wording unresolved |
Check the working requirements
Shank and collet
Confirm the actual receiving range for the intended shank.
Delivered type
Check the seller’s random old/new configuration notice if a cap shape is important.
Limits to keep with the choice
- No continuous 0–3 mm range, exact alloy or specific stem/broach/hairspring fit is established.
Questions before you choose
How does it differ from the Horotec slide-lock vise?
Buachois tightens screw-on caps at two ends. Horotec uses a sliding chuck lock with its own stated 0–1.5 mm opening.
Will it hold the shank I plan to use?
Confirm the exact shank-to-collet match. The listing gives 0–3 mm in the title but 0.5–0.8 and 1.4–2.0 mm in the description, without assigning those ranges to particular ends or constructions.
Can I select the older or newer cap shape?
The seller explicitly says old and new types are shipped randomly. A particular photographed cap shape is not selectable from this offer.
Guides for this choice
Alternatives for a comparable task
Selected listing descriptions, specifications and source images were compared for this reference. No hands-on trial is claimed. Product identifier: B0CGXL61R8.