Choosing within this department
Watch screwdrivers & blade care
Choose the blade contact first, then the handle, storage and replacement arrangement. This range includes a mixed slotted/Phillips assortment, a six-size slotted set and a cut-out/T-blade set, plus a separate rolling guide and abrasive stone. A useful kit is one whose actual profile matches the screw and whose spares match the driver—not simply the kit with the most pieces.
Compare the working profile before the size label
The Singcci set includes eight slotted sizes labeled 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8 and 2.0 mm, plus two Phillips drivers labeled 1.4 and 1.6 mm. It is the mixed-profile choice here. The Phillips millimeter labels are not PH1 or PH2 designations, so compare the actual cross profile rather than translating the numbers into another sizing system.
The Bergeon 7778 set supplies six 30081-series slotted drivers labeled 0.8, 1.0, 1.2, 1.4, 1.6 and 2.0 mm. The drivers are described as stainless steel with an elastomer coating. This is the alternative when those slotted sizes and that handle construction suit the work, without adding the mixed set’s Phillips tools.
Treat cut-out blades as a different contact
The Timelab set uses cut-out/T-shaped blades and supplies six drivers with twelve spare blades, two per size, in a plastic box. The listed blades have a PVD coating; the handle construction is described as iron plated with stainless steel. Compare the actual cut-out geometry with the screw instead of treating the set as another ordinary straight slotted assortment.
Timelab labels 0.8, 1.0, 1.2, 1.4, 1.6 and 2.0 mm as “Blade Thickness.” These are not verified conventional blade-width measurements. If width or thickness determines the match, obtain the actual working dimensions before choosing. Watch-brand references alone do not establish a fit to every bracelet screw or case component.
Compare spares and the bench arrangement
The Singcci assortment includes twenty spare blades—two for each of its ten drivers—and a rotating round stand with color identification. The Bergeon 7778 includes spare blades without an itemized count and a POM-C stand measuring 98 × 33 × 30 mm. Compare the compact POM-C storage arrangement with Singcci’s rotating round layout when planning how the drivers will sit at the bench.
The Timelab box is listed as 5.5 × 5.5 inches. That is a storage dimension, not a blade-working dimension. When comparing the sets, separate the convenience of the stand or case from the screw contact and exact replacement-blade interface; an included spare assortment does not establish compatibility with another maker’s handles.
Buy a care accessory for the job it supplies
The HURRISE offer is one copper-described rolling guide and one pink 3000-grit stone. The guide holds a screwdriver; the stone supplies the abrasive surface. No screwdrivers are itemized. It is therefore an accessory purchase for a documented blade-care setup, not an alternative complete driver set.
Before adding the guide, check the screwdriver shank and the blade maker’s instructions: an exact receiving range and a specified working bevel are not supplied. The 3000 label also does not identify a grit standard. This category compares the equipment; it does not prescribe a universal sharpening angle, torque or maintenance method.
Examples for the working choice
Questions before you choose
Which set adds Phillips drivers?
The Singcci assortment adds two Phillips drivers to eight slotted ones. Its Phillips labels are 1.4 and 1.6 mm, not established PH numbers, so match the actual screw profile.
Are Timelab’s size labels ordinary blade widths?
The seller calls the six millimeter values “Blade Thickness.” Do not treat them as verified blade widths; compare the actual cut-out profile and obtain the needed width and thickness if the fit depends on them.
Which set has a stated spare-blade quantity?
Singcci supplies twenty spares, two for each of ten drivers. Timelab supplies twelve, two for each of six. Bergeon 7778 includes spares without an itemized count. Choose by the relevant driver interface and profile as well as the count.
Does the HURRISE rolling guide include screwdrivers?
No screwdrivers are itemized: the offer is the rolling guide and a 3000-grit stone. Check the actual shank fit and documented care requirements of your existing driver before selecting the accessory.
Continue your selection
Selected listing details and reviewed source images inform these buying comparisons; exact fit and required service methods remain specific to each product and watch.
